TRSS-RJ45-24 Rack-mounted Network Signal Surge Protector

Short Description:

TRSS-RJ45-24 1000MPOE network lightning protection device (Gigabit POE lightning protection device, Ethernet power supply lightning protection device), designed and manufactured according to IEC and GB standards, while meeting the requirements of IEEE802.3AT, using high quality, high discharge capacity Surge protection devices, ultra-low junction capacitance, ultra-fast recovery diode matrix structure, network filters, etc. provide high-energy coarse-level protection and low-energy fine protection for data lines. It is suitable for servers that use six types of network cables to transmit power and network signals at the same time. , Wireless AP, network camera, network switch and other communication equipment surge protection, integrated integrated design, easy to install.

Product Detail

Product Tags

Product introduction TRSS-RJ45 series network lightning protection device mainly includes 100M network lightning protection device, Gigabit network lightning protection device, single-port network lightning protection device, 16-port network lightning protection device, 24-port network lightning protection device, network switch lightning protection device, Signal surge protector, and other network lightning protection products. The 10/100 network signal surge protector is designed according to the IEC communication network lightning protector standard, and is suitable for 10BASE T or 10/100M adaptive Ethernet surge protection. Standard RJ45 interface, protection circuit has 4-core line protection (1,2,3,6), 8-core line full protection (12, 36, 45, 78), plug and play. TRSS-RJ45-24 1000MPOE network lightning protection device (Gigabit POE lightning protection device, Ethernet power supply lightning protection device), designed and manufactured according to IEC and GB standards, while meeting the requirements of IEEE802.3AT, using high quality, high discharge capacity Surge protection devices, ultra-low junction capacitance, ultra-fast recovery diode matrix structure, network filters, etc. provide high-energy coarse-level protection and low-energy fine protection for data lines. It is suitable for servers that use six types of network cables to transmit power and network signals at the same time. , Wireless AP, network camera, network switch and other communication equipment surge protection, integrated integrated design, easy to install. Features of Gigabit POE network lightning protection device 1. It adopts composite symmetrical two-level protection circuit, full protection of coarse and fine, low residual voltage level and good protection effect; 2. The core components are selected international famous brand products with excellent performance; 3. Metal shielding shell, excellent performance; 4. Adopt two-in-one integrated design; 5. Clutter isolation, extremely small insertion loss, and superior transmission performance; 6. Quick response, stable performance, reliable work; 7. There are single-channel, 4-channel, 8-channel, 16-channel, and 24-channel to choose from, small in size, easy to install and use, no special maintenance Installation of lightning protection device and precautions 1. The Gigabit Ethernet POE network lightning arrester can be installed in the LPZ0-1 zone or directly connected in series at the front end of the protected equipment (or system), and the installation is as close as possible to the protected equipment (or system). 2. The input terminal (INPUT) of the lightning arrester is connected with the signal line, and the output terminal (OUTPUT) is connected with the protected equipment. 3. The PE wire of the lightning protection device must be connected to the ground of the lightning protection system with strict equipotential connection, otherwise it will affect the working performance. 4. Use the shortest wire connection possible for the grounding of the lightning arrester. The grounding of the lightning protection device adopts the terminal grounding method, and the grounding wire must be connected to the lightning protection ground Wire connection (the grounding resistance value is not more than 4 ohms). The shielded wire of the signal can be directly connected to the ground terminal. 5. The lightning protection device does not need long-term maintenance when installed under the conditions that do not exceed the requirements, only routine maintenance of the system; if there is a problem in signal transmission during use, the signal transmission will return to normal after the lightning protection device is replaced. It indicates that the lightning protector is damaged and needs to be repaired or replaced.

  • Previous:
  • Next:

    • Leave Your Message


    Leave Your Message